Tuesday, April 10, 2012

Looks like Rain on the Plains

After several hard years with no rain these clouds make me want to dance in the rain. We have been praying for rain for 18 months & Praise God for the 1" we received today.
Hay prices are at a record high and so many people are getting out of the horse business because they have to decide who to feed. Their horse or their children. It has been so hard to watch these families struggle.
Thank you Lord for our Saddle Shop our customers and the freedom we have in this beautiful country.
Pray for RAIN!

How To Install A Horn Cap on your Saddle

How do I install a horn cap?
 You drill a pilot hole in the horn.....half the size of the screw. Take care not to go thru the horn cap.
Since all saddles are different you may need to cut down the screw to the proper length.....you can often cut the screw with a wire cutter and then it needs to
be filed or ground with a grinder to a point. 
I add a small amount of saddle glue to the hole where the saddle horn cap goes in and then carefully screw it in.  
I large number of the people who purchase these take them to their local saddle shop for professional installation but many folks do install them on their own.
So not to do any damage to your saddle I strongly suggest going slowly and making sure you understand the process.

Wednesday, July 28, 2010

Eaton Ranch Brisket Rub

Eaton Ranch Brisket Rub

A Great dry rub and works well on Brisket, Carnitas (small cuts of Pork
Roast), Pork or Beef Ribs, Chicken or even Steaks!

1 cup sea salt
1 cup Brown Sugar
1/2 cup of course ground black pepper
1/2 cup of garlic powder
1/4 cup of onion salt
1/2 cup of Paparika
1/4 cup of cumin
2 tablespoons of red pepper aka cayenne (more if you like the heat)

makes 3 cups total

rub liberally on both sides of the brisket

Combine all ingredients. Store in an airtight container

Granny Eaton's Bread Pudding

Grandmothers Bread Pudding Recipe

2 cups Evaporated Canned milk
1/2 cup butter
1 cup of brown sugar
3 eggs
2 teaspoons cinnamon
1/4 teaspoon ground nutmeg
1 teaspoon vanilla extract
3 cups stale bread torn into small pieces
1/2 cup raisins (optional)


Directions:

1. In medium saucepan, over medium heat, heat canned milk just until film
forms over top (do not boil). Combine butter and milk, stirring until
butter is melted. Then let is set until it is Cool to lukewarm otherwise
it will scramble the eggs.

2. Combine sugar, eggs, cinnamon, nutmeg, and vanilla. Beat with an
electric mixer at medium speed for 1 minute. Slowly add milk and egg
mixture.

3. Place bread in a lightly greased 1 1/2 quart casserole.

4. Sprinkle with raisins if desired. Pour batter on top of bread.

5. Bake at 350 degrees on center rack for 45 to 50 minutes or until set.
Serve warm.

Sunday, May 9, 2010

What is Hermann Oak Leather?


What is Hermann Oak Leather?

Hermann Oak Leather is leather tanned by the Hermann Oak Leather company in St. Louis, Missouri. The Hermann Oak Leather company has been making leather since 1881 when Lewis Charles Hermann started the business to accommodate the local harness trade and to supply wagon loads of settlers on their way West.

Since 1881 the Hermann Oak Leather Company has earned the reputation of being the
premier leather manufacturer in the United States. Their specialty is vegetable
tanning, a type of tanning used to make leather for many uses, including saddle
making. Hermann Oak Leather can be found in certain saddles made by such prestigious
saddle makers as Circle Y, Billy Cook, and more.



Please come see us at RANCHco Saddle Shop
461 Hwy 62
Wolfforth, Tx 79382
806-687-9267

RANCHco Saddle SHop Bull Ropes How they are made


What about your bullropes?

Bull Rope Style and Design

Most of our ropes will be a 9 X 9 plait or 9 X 7 plait (right or left your choice). The tail is approx 7 1/2 ft measured from the block and the body is approx 7 1/2 ft including the loop (open). You will find most bull rope are going to be approx 15 ft (total) that are designed for Full Sized Bulls. Our ropes are all hand made and do vary slightly.



Our ropes are made from Polypropylene and it holds up well. Years ago bull ropes were made from Manila Grass and did not have leather laced in them. The leather lacing is a oiled tanned latigo lace that is hand cut. Braiding a Bullrope takes years of braiding experience and knowledge.



The block and handhold is the heart of a rope. We offer Standard American Style Bull Ropes (however Brazilian Style, Offset handholds, etc are also offered). The block is double laced, very stiff, and designed to not tip or roll.



You should consider the price range when buying a rope. The basic Starter Style rope will be between $80.00 and $100.00. This is a beginner’s starter rope. A better rope may cost upwards of $250.00 and up. Many Bullriding instructors will encourage students to start with a high quality professional style rope in the $200.00 and up price range although not everyone can afford one.



Our starter type ropes are generally 9 X 9 plait which is a softer type tail. On our more expensive ropes you can get "Soft, Extra soft, Baby nine, and tight plait tails, etc.



The starter rope has a "Half Laced" handhold and on more expensive ropes a "Full Laced" handhold is an option.



Bottom-line the better the rope the more it cost....the more it cost the longer it last and often the less roll or tip. Bull riding is a very dangerous Sport and we always encourage everyone to buy the best rope they can afford as it will pay off in the long run....mainly with fewer hang-ups and trips to the hospital....Safety First!

Please come see us at RANCHco Saddle Shop
461 HWY 62
Wolfforth, TX 79382
806-687-9267




When do you need Splint Boots, Bell Boots or Skid Boots ?


-When do you need splint boots?
Splint boots should be worn at all times. They provide protection to the splint and cannon bones should they be inadvertently struck by the hoof and/or shoe of the opposite foot. Some splint boots provide extra support for the tendons.

-What about bell boots?
Bell boots protect the coronet band from being struck by the hoof or shoe. This is particularly important in the early stages of teaching a horse to spin. Bell boots also protect the bulbs and heels of the front feet from the toe of the hind feet when a horse is sliding. Extra care should be given to keep bell boots clean. Sand accumulating in them will irritate the ankles, which can lead to a serious condition known as 'scratches'.
When do you need knee boots?
In some cases horses will rub one knee against the other while spinning. Knee boots should be used until the horse learns to spin without interfering.

-What about skid boots?
Skid boots should be used when the horse is being worked on sliding stops. Particular attention should be paid to keeping skid boots clean. When using leather boots, keep them well oiled. Stiff or dirty skid boots will could cause scalding.

If you near Lubbock come see us the coffee is always on at RANCHco Saddle Shop
461 Hwy 62
wolfforth, TX 79382
806-687-9267